PHOTOREDUCTION OF CO
2 IN THE SUSPENSION
SYSTEM OF SEMICONDUCTOR CATALYST
2 MODIFIED BY PALLADIUM--《PHOTOGRAPHIC SCIENCE AND PHOTOCHEMISTRY》1999年01期
PHOTOREDUCTION OF CO
2 IN THE SUSPENSION
SYSTEM OF SEMICONDUCTOR CATALYST
2 MODIFIED BY PALLADIUM
XU Yongjun
CHEN Fuming
JIANG Linlin
1 Daqing Staffs and Workers University, Daqing 163255, P.R.China)
2 Department of Chemical Engineering, Tsinghua University, Beijing 100084, P.R.China)
3 Department of App
The experiment of photoreduction of CO
2 was made in the suspension system of Pd/TiO
2 under the illumination of visible light. The findings from the experiments are: (1) Formic acid is the major product of the photoreduction process and its quantum yiel (2) The reaction rate increases with the increase of the illumination intensity as well as the feed flowrate of CO
2. It can also be increased by adding an electron donor to the system and the increasing capacity is in the sequence of Na
2; (3) The photoreduction process was found to be an opposing reaction by dynamics analysis. A model of reaction mechanism, by which the calculated result consisted well with the experimental one, was proposed.
【CateGory Index】：
supports all the CNKI
only supports the PDF format.
【References】
Chinese Journal Full-text Database
YE Qing-guo,SUN Jin-liang,TAO Xu-mei (College of Chemical Engineering,Qingdao University of Science and Technology, Qingdao 266042,Shandong Province,China);[J];化学工程;2013-02
HE Zhiqiao, TU Jinjun, SONG Shuang, QIU Jianping, CHEN Jianmeng(College of Biological & Environmental Engineering,Zhejiang University of Technology,Hangzhou 310032,Zhejiang,China);[J];化工学报;2008-06
SONG Li-li,ZHANG Ning,CHEN Chao,ZHONG Jin-lian(Chemistry Department of Nanchang University,Jiangxi,Nanchang 330031,China);[J];有色金属(冶炼部分);2007-04
LI You-ji~(1,2),LI Xiao-dong~2,LI Jun-wen~3,YIN Jing~3(1.Dept.of Biology Engineering and Environmental Science of Changsha College,Changsha 410082,China2.CFC Key Lab of National University of Defence Technology,Changsha .Institute of Hygiene and Environmental Medicine,Academy of Military Medical Science,Tianjin 300050,China);[J];材料科学与工艺;2006-03
WU Shu-xin~(1,2,3),YIN Yan-hua~2,MA Zhi~1,QI Xiao-zhou~1,LIANG Zhen-cheng~1,QIN Yong-ning~1(1.School of Chemical Engineering and Technology,Tianjin university,Tianjin .The 718~(th) Research Institute,HanDan .Institute of Advanced Catalysis and Technology,Tangshan Teacher's College,Tangshan 063000,China);[J];天然气化工;2005-05
CHEN Songzhe, ZHONG Shunhe
*, XIAO Xiufen(State Key Laboratory of C1 Chemistry and Technology, College of Chemical Engineering and Technology,
Tianjin University, Tianjin 300072, China);[J];催化学报;2003-01
WU Rongguo & SI Minzhen:;[J];楚雄师专学报;2001-03
【Co-references】
Chinese Journal Full-text Database
CAO Jun(Shanghai Lianheng Isocyanate Co.,Ltd.,Shanghai 201507,China);[J];河北化工;2007-03
SHENG Jiangfeng,MA Chun’an,ZHANG Cheng,LI Guohua,ZHANG Weimin (State Key Laboratory Breeding Base for Green Chemistry Synthesis Technology,Research Center of Nano Science and Technology,School of Chemical Engineering and Materials Science,Zhejiang University of Technology,Hangzhou 310032,Zhejiang,China);[J];化工学报;2006-10
YUN Xinhua,SHANGGUAN Wenfeng (Research Center for Combustion and Environment Technology, School of Mechanical and Power Engineering , Shanghai Jiao Tong University, Shanghai 200030, China);[J];化工学报;2006-01
WANG Bao-wei,SONG Hua,XU Gen-hui(Key Laboratory for Green Chemical Technology of Ministry of Education,School of Chemical Engineering,Tianjin University,Tianjin 300072,China);[J];现代化工;2005-S1
, Ning Ping
(1. Southwest University of Science and Technology, Mianyang 621010, Sichuang, C
2. Kunming University of Science and Technology,
Kunming 650093, Yunnan, China);[J];西南科技大学学报(哲学社会科学版);2004-04
ZHOU Kang-han, FU Lan, HAN Yong-qiang, LI Jun-rong.
ZHOU Kang-han.Institute of Space Medico-Engineering, Beijing 100094,C[J];航天医学与医学工程;2003-S1
YE Xiang-qun,
SUN Liang,
ZHANG Ling,
ZHOU Zhi-jun,
CHEN Huan-lin (Department of Chemical Engineering and Biological Engineering,Zhejiang University, Hangzhou 310027,China);[J];高校化学工程学报;2003-03
LI Chunlin, FU Yilu
*, BIAN Guozhu(Department of Chemical Physics, University of Science and Technology of China, Hefei 230026, Anhui, China);[J];催化学报;2003-03
CHEN Song-Zhe,
ZHONG Shun-He
(State Key Laboratory of C
1 Chemistry and Technology, College of Chemical Engineering and Technology,
Tianjin University, Tianjin 300072, China);[J];高等学校化学学报;2003-01
*, WEI Wei, LI Baoqing, ZHAO Weijun, HUANG Weiping, ZHANG Shoumin(Department of Chemistry, Nankai University, Tianjin 300071, China);[J];催化学报;2003-01
【Secondary References】
Chinese Journal Full-text Database
XIE Yu-SUN Zhen-LI HZHOU Dao-YANG Hong-FANG Ji-School of Resources and Environmental Engineering,Wuhan University of TMaterials Research and Testing Center,Wuhan University of T;[J];电子显微学报;2017-03
Wang YWang YDepartment of Basic,Chinese People's Armed Police A;[J];实验技术与管理;2015-07
Tao YYang LGe FZhu LZhang XZheng SWang ZCollege of Biochemistry Engineering,Anhui Polytechnic U;[J];环境工程学报;2015-06
LIU Na;ZHAO Dan-LEI Yan-ZHOU An-College of Chemistry and Chemical Engineering,Xi'an University of Science and T;[J];化学工程;2014-12
MA DMA CZHANG XDONG XZHANG XMA HSchool of Light Industry and Chemical Engineering,Dalian Polytechnic U;[J];大连工业大学学报;2014-06
ZHU DFENG Jing-CHEN PLANG LSchool of Civil Engineering,Hefei University of T;[J];环境科学与技术;2013-S2
ZHENG Yun,PAN Zhiming,WANG Xinchen * Research Institute of Photocatalysis,College of Chemistry and Chemical Engineering,Fuzhou University,Fuzhou 350002,Fujian,C[J];催化学报;2013-03
ZHAO Yi,LIU Wei,ZHANG Zi-li,ZHU Xiao-yu(School of Environmental Science and Engineering,North China Electric Power University,Baoding 071003,China);[J];中国电力;2013-01
WU Congping,ZHOU Yonga,ZOU Zhigangb Ecomaterial and Renewable Energy Research Center,Nanjing University,Nanjing 210093,Jiangsu,C[J];催化学报;2011-10
WU Shu-xin,LIU Chang-hong(Tangshan Normal University,Hebei Tanghan 063000,China);[J];天然气化工(C1化学与化工);2011-03
Similar Journals
(C)2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved<input type="hidden" name="author" value="Coppens, Paul (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE), Hoes, Eric (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE), Vervloet, Ludovicus (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE), Parmentier, Brigitte (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE)"/>
<input type="hidden" name="author_end" value="Coppens, Paul (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE), Hoes, Eric (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE), Vervloet, Ludovicus (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE), Parmentier, Brigitte (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE)"/>
A sealed package for imaging elements for making lithographic printing plates according to the silver salt diffusion transfer process
European Patent EP0658809
Abstract of EP0658809The present invention provides a method for making an offset printing plate according to the silver salt diffusion transfer process comprising the steps of: (a) image-wise exposing an imaging element comprising (i) a hydrophilic base, (ii) an image receiving layer containing physical development nuclei, (iii) an intermediate layer, and (iv) a silver halide emulsion layer, (b) applying an aqueous alkaline solution to the imaging element in the presence of (a) developing agent(s) and (a) silver halide solvent(s) to form image-wise in said image receiving layer a silver image, (c) treating the imaging element to remove the layer(s) on top of said image receiving layer, characterized in that said imaging element has been stored before image-wise exposure in a surrounding having at 22 DEG C a relative humidity between 20% and 50%. According to the present invention there is also provided a package of the imaging element, making said imaging element suitable for use in the above defined method.
Inventors:
Coppens, Paul (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE)
Hoes, Eric (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE)
Vervloet, Ludovicus (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE)
Parmentier, Brigitte (c/o Agfa-Gevaert N.V., DIE 3800,, Septestraat
Mortsel, 27, B-2640, BE)
Application Number:
Publication Date:
06/16/1999
Filing Date:
12/17/1993
Export Citation:
AGFA-GEVAERT N.V. (Septestraat 27, Mortsel, 2640, BE)
International Classes:
G03F7/09; G03C3/00; G03C8/06; G03C11/00; G03F7/07; G03F7/11; G03F7/26; (IPC1-7): G03F7/07; G03C3/00; G03C8/06; G03C11/00
European Classes:
G03C3/00; G03C8/06; G03C11/00; G03F7/07
View Patent Images:
&&&&&&PDF help
Domestic Patent References:
EP0394874EP0410500EP0483415
Foreign References:
FR1596535AGB1320452A5083665Packaging for X-ray films
Other References:
'ISO STANDARDS HANDBOOK 26 PHOTOGRAPHY' 1985 , INTERNATIONAL ORGANIZATION FOR STANDARDIZATION , GENEVA CH * page 275, paragraph 7 - page 276 *
PATENT ABSTRACTS OF JAPAN vol. 10, no. 143 (P-459)(2200) 27 May 1986 & JP-A-60 262 152 (FUJI SHASHIN FILM) 25 December 1985
PATENT ABSTRACTS OF JAPAN vol. 14, no. 230 (P-) 16 May 1990 & JP-A-02 056 547 (FUJI PHOTO FILM)
1. A sealed package of at least one sheet of an imaging element in a packaging material, said imaging element comprising in the order given (i) a hydrophilic base, (ii) an image receiving layer containing physical development nuclei, (iii) an intermediate layer comprising a non-proteinic hydrophilic film-forming polymer or hydrophobic polymer beads having an average diameter not lower than 0.2 um and having been prepared by polymerization of a ethylenically unsaturated monomer, and (iv) a photosensitive layer containing a silver halide emulsion being in water permeable relationship with said image receiving layer, wherein the surrounding of the imaging element in such a package has at 22°C a relative humidity between 20% and 50% and wherein said package contains at least 2 sheets of the imaging element with a paper spacer between each sheet of the imaging element, characterized in that said paper spacer has a weight of more than 15 g/m2, contains less than 20 ppm by weight of formaldehyde and has a pH of less than 9.
2. A package according to claim 1 wherein said surrounding has at 22°C a relative humidity between 30% and 40%.
3. A package according to claim 1 or 2 wherein said packaging material has an air permeability of less than 3.5 ml/s as measured according to DIN 53120.
4. A package according to any of claims 1 to 3 wherein said packaging material is an aluminium foil, a laminate of aluminium or a laminate of uniaxially oriented polyethylene films with the orientation perpendicular to each other.
5. A package according to any of claims 1 to 4 wherein said package contains as the bottom and the top sheet a cardboard sheet.
6. A package according to claim 6 wherein said cardboard sheet has a weight of more than 300 g/m2 and contains less than 40 ppm by weight of formaldehyde.
Description:
The present invention relates to a method for making improved offset printing plates according to the silver salt diffusion transfer process. Furthermore the present invention relates to a package of imaging elements suitable for use in the method defined above. Background of the invention.The principles of the silver complex diffusion transfer reversal process, hereinafter called DTR-process, have been described e.g. in US-P 2,352,014 and in the book "Photographic Silver Halide Diffusion Processes" by André Rott and Edith Weyde - The Focal Press - London and New York, (1972).In the DTR-process non-developed silver halide of an information-wise exposed photographic silver halide emulsion layer material is transformed with a so-called silver halide solvent into soluble silver complex compounds which are allowed to diffuse into an image receiving layer and are reduced therein with a developing agent, generally in the presence of physical development nuclei, to form a silver image having reversed image density values ("DTR-image") with respect to the black silver image obtained in the exposed areas of the photographic material.A DTR-image bearing material can be used as a planographic printing plate wherein the DTR-silver image areas form the water-repellant ink-receptive areas on a water-receptive ink-repellant background. The DTR-image can be formed in the image receiving layer of a sheet or web material which is a separate element with respect to the photographic silver halide emulsion material (a so-called two-sheet DTR element) or in the image receiving layer of a so-called single-support-element, also called mono-sheet element, which contains at least one photographic silver halide emulsion layer integral with an image receiving layer in waterpermeable relationship therewith. It is the latter mono-sheet version which is preferred for the preparation of offset printing plates by the DTR method.Two main types of mono-sheet DTR imaging elements exist.
According to a first type disclosed in e.g. US-P-4,722,535 and GB-1,241,661 a support is provided in the order given with a silver halide emulsion layer and a layer containing physical development nuclei serving as the image-receiving layer. After information-wise exposure and development the imaged element is used as a printing plate without the removal of the emulsion layer. Printing plates of this type have a low printing endurance typically around 10000 copies.According to a second type a hydrophilic support, mostly anodized aluminium, is provided in the order given with a layer of physical development nuclei and a silver halide emulsion layer. After information-wise exposure and development the imaged element is treated to remove the emulsion layer so that a support carrying a silver image is left wich is used as a printing plate. Printing plates of this type have a much higher printing endurance typically at least 25000 copies. Such type of lithographic printing plate is disclosed e.g. in US-P-3,511,656, EP-A-278766, EP-A-410500 and EP-A-483415.It has however been found that the lithographic properties of a lithographic printing plate obtained from a mono-sheet DTR imaging element of the second type deteriorates upon storage of said imaging element, even when stored according to "Iso Standards Handbook 26 Photography 1985, pages 275 to 276. Therein is described that photographic plates should be stored at a temperature between a minimum of 15°C and a maximum of 25°C and preferably below 20°C and a relative humidity between a minimum of 20% and a maximum of 50% and preferably below 40%. Summary of the invention.It is an object of the present invention to provide an imaging element for making offset printing plates according to the silver salt diffusion transfer process having an improved storage stability.Further objects of the present invention will become clear from the description hereinafter.According to the present invention there is provided a sealed package of at least one sheet of an imaging element in a packaging material, said imaging element comprising in the order given (i) a hydrophilic base, (ii) an image receiving layer containing physical
development nuclei, (iii) an intermediate layer comprising a non-proteinic hydrophilic film-forming polymer or hydrophobic polymer beads having an average diameter not lower than 0.2 um and having been prepared by polymerization of a ethylenically unsaturated monomer, and (iv) a photosensitive layer containing a silver halide emulsion being in water permeable relationship with said image receiving layer,wherein the surrounding of the imaging element in such a package has at 22°C a relative humidity between 20% and 50% and wherein said package contains at least two sheets of the imaging element with a paper spacer between each sheet of the imaging element, characterized in that said paper spacer has a weight of more than 15 g/m2, contains less than 20 ppm by weight of formaldehyde and has a pH of less than 9. Detailed description of the invention.According to the present invention it has been found that a lithographic printing plate obtained according to the DTR-process by using an imaging element of the second type that has been stored before image-wise exposure in a surrounding with a relative humidity at 22°C between 20% and 50% produces prints with almost no white spots in the printing areas and that during the preparation of said plate the emulsion layer is easily and completely removed. When an imaging element has not been stored in such surrounding, there occurs a hardening of the emulsion layer, resulting in an incomplete removal of the emulsion layer and the intermediate layer, thereby causing in said places of incomplete removal an insufficient differentiation between ink accepting and non-ink accepting properties of the printing plate. This incomplete removal is not avoided by the presence of the intermediate layer which facilates the removal of said layer(packet) as disclosed in EP-A-410500 andin EP-A-483415. Furthermore there also occurs fogging of the emulsion layer, resulting in a lowered silver deposition on the image receiving layer, thereby causing a drastically reduced endurance of the printing plate.By the surrounding of the imaging element is understood that part of the atmosphere which is in free contact with the imaging element.The relative humidity of the surrounding of the imaging element is measured with a Hygroscoop Rotronic Type GTS-200-50 ( marketed by
Krautli N.V., Groot Bijgaarden, Belgium) by adjusting the temperature of the imaging element and its surrounding to 22°C, bringing the sensor element of the Hygroscoop Rotronic Type GTS-200-50 in the surrounding and waiting for 60 seconds.According to the invention the imaging element has been stored in a surrounding having at 22°C a relative humidity between 20% and 50%. Preferably the imaging element has been stored in a surrounding having at 22°C a relative humidity between 30% and 40%.The imaging element is preferably prepared by coating the different layers on a hydrophilic base. Alternatively the different layers may be laminated to said image receiving layer from a temporary base holding the layers in reverse order as disclosed in US-P 5,213,943.Subsequently the imaging element is conditioned, cut in sheets and packaged in a packaging material which is impermeable to water or minimizes the amount of water that can penetrate into the package whereafter the packaging material is sealed. Suitable packaging materials have an air permeability of less than 3.5 ml/s as measured according to DIN 53120. Examples of suitable packaging materials are e.g. aluminium foils and laminates of aluminium, high density polyethylene packaging material, laminates of uniaxially oriented polyethylene films with the orientation perpendicular to each other.According to the invention, the surrounding of the imaging element in such a package has at 22°C a relative humidity between 20% and 50%, preferably between 30% and 40%. Said surrounding can be obtained by conditioning and/or cutting and/or packaging the imaging element in an atmosphere which has at 22°C a relative humidity between 20% and 50%, preferably between 30% and 40%Preferably such a sealed package contains as the bottom and the top sheet a cardboard sheet, more preferably a cardboard sheet having a weight of more than 300 g/m2 and containing less than 40 ppm by weight of formaldehyde.A package contains more than 1 sheet of the imaging element. In that case, there is put a paper spacer between each sheet of the imaging element. Said paper spacer has a weight of more than 15 g/m2, contains less than 20 ppm by weight of formaldehyde and has a pH of less than 9, as measured by soaking 15 g of finely divided spacer in 300 ml of distilled water for 24 hours and registering the pH of the obtained solution. Suitable papers are manufactured by e.g. Glory Mills Papers Ltd, G.B., Neubrucker Papier, Austria,
Intermills N.V., Belgium, Illig'sche Papierfabrik Gmbh, Germany and Leinfelder G. Gmbh, Germany.The imaging element used according to the invention,comprises in the order given (i) a hydrophilic base, (ii) an image receiving layer containing physical development nuclei, (iii) an intermediate layer and (iv) a photosensitive layer containing a silver halide emulsion being in water permeable relationship with said image receiving layer,The hydrophilic base can be a hardened hydrophilic layer, containing a hydrophilic synthetic homopolymer or copolymer and a hardening agent coated on a flexible support. Preferred hydrophilic layers are layers of polyvinyl alcohol hardened with a tetraalkyl orthosilicate and preferably containing SiO2 and/or TiO2, wherein the weight ratio between said polyvinylalcohol and said tetraalkyl orthosilicate is between 0.5 and 5 as disclosed in e.g. GB-P 1,419,512, FR-P 2,300,354, US-P-3,971,660, US-P 4,284,705, EP-A 405,016 and EP-A 450,199. More preferably said layers also contain physical development nuclei in an amount between 0.2 and 2 mg/m2.Most preferably an aluminium support is used as a hydrophilic base.The aluminium support of the imaging element for use in accordance with the present invention can be made of pure aluminium or of an aluminium alloy, the aluminium content of which is at least 95%. The thickness of the support usually ranges from about 0.13 to about 0.50 mm.The preparation of aluminium or aluminium alloy foils for lithographic offset printing comprises the following steps : graining, anodizing, and optionally post-treating of the foil. Graining and anodization of the foil are necessary to obtain a lithographic printing plate that allows to produce high-quality prints in accordance with the present invention. Sealing is not necessary but may still improve the printing results. Preferably
the aluminium foil has a roughness with a CLA value between 0.2 and 1.5 um an anodization layer with a thickness between 0.4 and 2.0 um and is sealed with an aqueous bicarbonate solution.The graining, anodizing, and sealing of the aluminium foil can be performed as described in e.g. in U.S. Serial No. 08/035,965, US-P-3,861,917 and in the documents referred to therein.To promote the image sharpness and, as a consequence thereof, the sharpness of the final printed copy, the anodization layer may be coloured in the mass with an antihalation dye or pigment e.g. as described in JA-Pu-58-14,797.Subsequent to the preparation of the hydrophilic base as described above the hydrophilic base may be immediately coated with a solution containing the physical development nuclei or may be coated with said solution at a later stage.The image receiving layer for use in accordance with the present invention is preferably free of hydrophilic binder but may comprise small amounts up to 30% by weight of the total weight of said layer of a hydrophilic colloid e.g. polyvinyl alcohol to improve the hydrophilicity of the layer.Preferred development nuclei for use in accordance with the present invention are sulphides of heavy metals e.g. sulphides of antimony, bismuth, cadmium, cobalt, lead, nickel, palladium, platinum, silver, and zinc. Other suitable development nuclei are heavy metal salts such as e.g. selenides, polyselenides, polysulphides, mercaptans, and tin (II) halides. Heavy metals, preferably silver, gold, platinum, palladium, and mercury can be used in colloidal form. More preferred development nuclei for use in accordance with the present invention are nuclei, especially sulphides of heavy metals having an average diameter less than 6 nm and wherein the number of nuclei having a diameter larger than 4.5 nm is less than 15% of the total number of nuclei contained in said image receiving layer as disclosed in U.S. Serial No. 07/979,897. Especially preferred development nuclei in connection with the present invention are palladium sulphide nuclei having an average diameter less than 6 nm and wherein the number of nuclei having a diameter larger than 4.5 nm is less than 15% of the total number of nuclei contained in said image receiving layer.The distance between the development nuclei for use in accordance with the present invention is an important factor with regard to the printing endurance of a lithographic plate of the
second type obtained according to the silver salt diffusion transfer process. Preferably, the distance between a development nucleus and the nearest one is for at least 90% of the number of development nuclei between 100 nm and 5 nm, more preferably between 50 nm and 5 nm, most preferably between 20 nm and 7 nm.To promote the image sharpness the hydrophilic base can be provided with a very thin antihalation coating of a dye or pigment or the image receiving layer may incorporate at least one antihalation dye or pigment.The photosensitive layer used in accordance with the present invention may be any layer comprising a hydrophilic colloid binder and at least a silver halide emulsion, at least one silver halide emulsion being photosensitive.The photographic silver halide emulsion(s) used in accordance with the present invention can be prepared from soluble silver salts and soluble halides according to different methods as described e.g. by P. Glafkides in "Chimie et Physique Photographique", Paul Montel, Paris (1967), by G.F. Duffin in "Photographic Emulsion Chemistry", The Focal Press, London (1966), and by V.L. Zelikman et al in "Making and Coating Photographic Emulsion", The Focal Press, London (1966).For use according to the present invention the silver halide emulsion or emulsions preferably consist principally of silver chloride while a fraction of silver bromide may be present ranging from 1 mole % to 40 mole %. Most preferably a silver halide emulsion containing at least 70 mole% of silver chloride is used.The average size of the silver halide grains may range from 0.10 to 0.70 um , preferably from 0.25 to 0.45 um.Preferably during the precipitation stage iridium and/or rhodium containing compounds or a mixture of both are added. The concentration of these added compounds ranges from 10-8 to 10-3 mole per mole of AgNO3, preferably between 10-7 and 10-6 mole per mole of AgNO3.The silver halide emulsions can be chemically sensitized. A method of chemical sensitization has been described in the article of R.KOSLOWSKY, Z. Wiss. Photogr. Photophys. Photochem. 46, 65-72 (1951).The silver halide emulsions of the DTR-element can be spectrally sensitized according to the spectral emission of the exposure source for which the DTR element is designed.Suitable sensitizing dyes for the visible spectral region include methine dyes such as those described by F.M. Hamer in "The Cyanine Dyes and Related Compounds", 1964, John Wiley & Sons.The spectral photosensitivity of the silver halide can also be adjusted for exposure by laser light e.g. helium-neon laser light, argon laser light, and solid state laser light. Dyes that can be used for adjusting the photosensitivity to laser light have been disclosed i.a. in the documents cited in EP-A- and US-P-5,200,294.The silver halide emulsions may contain the usual emulsion stabilizers. Suitable emulsion stabilizers are azaindenes, preferably tetra- or penta-azaindenes, especially those substituted with hydroxy or amino groups. Compounds of this kind have been described by BIRR in Z. Wiss. Photogr. Photophys. Photochem. 47, 2-27 (1952). Other suitable emulsion stabilizers are i.a. heterocyclic mercapto compounds.As binder in the silver halide emulsion layer(s) in connection with the present invention a hydrophilic colloid may be used, usually a protein, preferably gelatin. Gelatin can, however, be replaced in part or integrally by synthetic, semi-synthetic, or natural polymers. Preferably the silver halide emulsion layer contains at least one gelatin species whereof a 10 % by weight aqueous solution at 36 °C and pH 6 has a viscosity lower than 20 mPa.s at a shearing rate of 1000 s-1 combined with a gelatin of a higher viscosity. The weight ratio of said low viscosity gelatin versus the gelatin of a higher viscosity is preferably & 0.5.Preferably the gelatin layer(s) is (are) substantially unhardened. Substantially unhardened means that when such gelatin layer is coated on a subbed polyethylene terephtalate film base at a dry thickness of 1.2 g/m2, dried for 3 days at 57 C° and 35% R.H. and dipped in water of 30 C°, said gelatin layer is dissolved for &95 % by weight within 5 minutes.The silver halide emulsions may contain pH controlling ingredients. Preferably the silver halide emulsion layer is coated at a pH value below the isoelectric point of the gelatin to improve the stability characteristics of the coated layer. Other ingredients such as antifogging agents, development accelerators, wetting agents, and hardening agents for gelatin may be present. The silver halide emulsion layer may comprise light-screening dyes that absorb scattering light and thus promote the image sharpness.
Suitable light-absorbing dyes are described in i.a. US-P-4,092,168, US-P-4,311,787, DE-P-2,453,217.More details about the composition, preparation and coating of silver halide emulsions suitable for use in accordance with the present invention can be found in e.g. Product Licensing Index, Vol. 92, December 1971, publication 9232, p. 107-109.The imaging element also comprises an intermediate layer between the image receiving layer on the hydrophilic base and the photosensitive layer (packet) to facilate the removal of said layer (packet) thereby uncovering the silver image formed in the image receiving layer by processing the imaging element.In one embodiment, the intermediate layer is a water-swellable intermediate layer coated at a ratio of 0.01 to 2.0 g/m2 and comprising at least one non-proteinic hydrophilic film-forming polymer and optionally comprising an antihalation dye or pigment as disclosed in EP-A-410500.In another embodiment, the intermediate layer is a layer comprising hydrophobic polymer beads having an average diameter not lower than 0.2 um and having been prepared by polymerization of at least one ethylenically unsaturated monomer. Preferably, said intermediate layer in dry condition comprises said hydrophobic polymer beads in an amount of up to 80% of its total weight. Further details are disclosed in EP-A-483415.A supplemental intermediate layer, which may be present between said silver halide emulsion containing layer and said water-swellable intermediate layer or said intermediate layer comprising hydrophobic polymer beads may incorporate one or more ingredients such as i.a. antihalation dyes or pigment, developing agents, silver halide solvents, base precursors, and anticorrosion substances.When the imaging element is prepared by laminating a layer packet comprising a photosensitive layer onto the image receiving layer the intermediate layer(s) are provided on the photosensitive layer(s), the water-swellable intermediate layer or the intermediate layer comprising hydrophobic polymer beads having an average diameter not lower than 0.2 um and having been prepared by polymerization of at least one ethylenically unsaturated monomer being the upper layer.A wide choice of cameras for exposing the photosensitive silver halide emulsion exists on the market. Horizontal, vertical and
darkroom type cameras and contact-exposure apparatus are available to suit any particular class of reprographic work. The imaging element can also be exposed with the aid of i.a. laser recorders and cathode rays tubes.The development and diffusion transfer are effected with the aid of an aqueous alkaline solution in the presence of (a) developing agent(s) and (a) silver halide solvent(s). The developing agent(s) and/or the silver halide solvent(s) can be incorporated in the aqueous alkaline solution and/or in said silver halide emulsion layer and/or in any of said intermediate layers and/or in a supplemental hydrophilic colloid layer in water-permeable relationship with said silver halide emulsion layer. The latter supplemental hydrophilic colloid layer can be coated on top of said silver halide emulsion layer remotest from said hydrophilic base.The silver halide solvent can also be incorporated at least in part in the physical development nuclei containing layer. When the aqueous alkaline solution does not comprise the developing agent(s), it is merely an activating liquid that is capable of dissolving the developing agent(s) contained in one of the layers.Silver halide developing agents for use in accordance with the present invention are preferably of the p-dihydroxybenzene type, e.g. hydroquinone, methylhydroquinone or chlorohydroquinone, preferably in combination with an auxiliary developing agent being a 1-phenyl-3-pyrazolidinone-type developing agent and/or p-monomethylaminophenol. More details are disclosed in EP-A-0628878. However other developing agents can be used. Preferred amounts of the hydroquinone-type developing agents are in the range of 0.05 mole to 0.25 mole per litre and preferred amounts of secondary developing agent(s) in the range of 1.8 x 10-3 to 2.0 x 10-2 mole per litre.The silver halide solvent, which acts as a complexing agent for silver halide, preferably is a water-soluble thiosulphate or thiocyanate e.g. sodium, potassium, or ammonium thiosulphate and sodium, potassium, or ammonium thiocyanate.Further silver halide solvents that can be used in connection with the present invention are alkanolamines. Alkanolamines that are suitable for use in accordance with the present invention may be of the tertiary, secundary or primary type. Examples of alkanolamines that may be used in connection with the present invention are disclosed in e.g. U.S. Serial No. 07/810,146.The alkanolamines are preferably present in the alkaline processing liquid in a concentration preferably between 0.05% and 10% by weight. However part or all of the alkanolamine can be present in one or more layers of the imaging element.Further suitable silver halide solvents are thioethers. Preferably used thioethers are disclosed in e.g. US-P-4,960,683 and US-P-5,200,294.Still further suitable silver halide solvents are meso-ionic compounds. Preferred meso-ionic compounds for use in accordance with the present invention are triazolium thiolates and more preferably 1,2,4-triazolium-3-thiolates. More details are disclosed in US-Serial No. 07/986,071Still further suitable silver halide solvents are sulphite, amines, 2-mercaptobenzoic acid and those disclosed in "The Theory of the Photographic Process" 4th Ed., edited by T.H.James, pages 474-475. Further interesting silver halide solvents have been described in i.a. US-P-2,857,276, 4,355,090, 4,297,429 and 4,297,430. Among these are cyclic imide compounds such as e.g. uracil and 5,5-dialkylhydantoins. Other suitable silver halide solvents are the alkyl sulfones.Combinations of different silver halide solvents can be used and it is also possible to incorporate at least one silver halide solvent into a suitable layer of the imaging element and to add at least one other silver halide solvent to the developing solution.Examples of suitable combinations of different silver halide solvents are a combination of (an) alkanolamine(s) and a thiosulfate as disclosed in U.S. Serial No. 07/810,151 and 4,6-dihydroxypyrimidines in combination with other silver halide solvents as disclosed in U.S. Serial No. 07/810,146.The aqueous alkaline solution may further comprise sulphite e.g. sodium sulphite in an amount ranging from 40 g to 180 g per litre, preferably from 60 to 160 g per litre, and a silver halide solvent, preferably a water soluble thiosulphate and/or thiocyanate in an amount ranging from 5 g to 20 g per litre.Examples of other suitable combinations of different silver halide solvents are combinations of a meso-ionic compound and another silver halide solvent as disclosed in US-Serial No. 07/986,071.Combinations of at least one silver halide solvent and a regulator may also be used. Suitable regulators are disclosed in
U.S. Serial No. 07/986,072 and in EP-A-0 576 736.The aqueous alkaline solution used according to the present invention preferably comprises aluminium ions in an amount of at least 0.3 g/l in order to prevent sticking of the emulsion layer to the transporting rollers when the emulsion is swollen with the aqueous alkaline solution. More preferably the aqueous alkaline solution used in accordance with the present invention comprises aluminium ions in an amount of at least 0.6 g/l.The alkaline processing liquid preferably has a pH between 9 and 14 and more preferably between 10 and 13. Said pH may be established by an organic or inorganic alkaline substance or a combination thereof. Suitable inorganic alkaline substances are e.g. potassium or sodium hydroxide, carbonate, phosphate etc.. Suitable organic alkaline substances are e.g. alkanolamines. In the latter case the alkanolamines will provide or help providing the pH and serve as a silver halide complexing agent.The processing conditions such as pH, temperature and time may vary within broad ranges provided the mechanical strength of the materials to be processed is not adversely influenced and no decomposition takes place.The aqueous alkaline solution may further comprise hydrophobizing agents for improving the hydrophobicity of the silver image obtained in the image image receiving layer. Generally these compounds contain a mercapto group or thiolate group and one or more hydrophobic substituents. Examples of hydrophobizing agents are e.g. those described in US-P-3,776,728, and US-P-4,563,410. Particularly preferred hydrophobizing agents are long chain (at least 5 carbon atoms) alkyl substituted mercaptotetrazoles. More details are disclosed in EP-A-0 628 878. The hydrophobizing agents can be used alone or in combination with each other.The aqueous alkaline solution preferably also comprises oxidation preservatives, a compound releasing bromide ions, calcium-sequestering compounds e.g. EDTA or its sodium salt, thickening agents e.g. cellulose or its derivatives such as carboxymethylcellulose and anti-sludge agents.Regeneration of the aqueous alkaline solution according to known methods is, of course, possible, whether the solution incorporates developing agent(s) and/or silver halide solvent(s) or not.The development may be stopped - though this is often not necessary - with a so-called stabilization liquid, which actually is
an acidic stop-bath having a pH preferably in the range of 5 to 6 as disclosed in EP-A-519,123.The development and diffusion transfer can be initiated in different ways e.g. by rubbing with a roller, by wiping with an absorbent means e.g. with a plug of cotton or sponge, or by dipping the material to be treated in the liquid composition. Preferably, they proceed in an automatically operated apparatus. They are normally carried out at a temperature in the range of 18°C to 30°C.After formation of the silver image on the lithographic image receiving element an excess of alkaline solution still present on the monosheet layer assemblage may be eliminated, preferably by guiding the monosheet layer assemblage through a pair of squeezing rollers.The silver image thus obtained in the image receiving layer is subsequently uncovered by treating the imaging element to remove the photosensitive layer and the intermediate layer.Various embodiments for removing the photosensitive layer and the intermediate layer(s) are disclosed in EP-A 483,415According to a particularly preferred embodiment for removing the photosensitive layer(s) and the intermediate layer(s) the imaging element is held under a spray or jet of rinsing water or rinsing aqueous medium. The rinsing aqueous medium used to detach the intermediate layer(s) and the emulsion layer(s) (s) by rinsing may comprise ingredients such as i.a. wetting agents, and hardeners including latent hardeners.The temperature of the rinsing water may be varied widely but is preferably between 20°C and 45°C.The aqueous alkaline solution and/or the rinsing aqueous medium suitable for use according to the present invention may comprise biocides such as 5-bromo-5-nitro-1,3-dioxane, 3-methyl-4-chlorophenol, o-phenyl-phenol, p-phenyl-phenol. Preferably, said biocides are used in the aqueous alkaline solution in a concentration of at least 0.1 g/l, more preferably in a concentration of at least 1 g/l or in the rinsing aqueous medium in a concentration of at least 25 mg/l, more preferably in a concentration of at least 115 mg/l.The imaged surface of the lithographic base can be subjected to a chemical treatment that increases the hydrophilicity of the non-silver image parts and the oleophilicity of the silver image.This chemical after-treatment is preferably carried out with a
lithographic composition often called fixer, which comprises at least one compound enhancing the ink-receptivity and/or lacquer-receptivity of the silver image, and also comprises at least one compound that improves the ink-repelling characteristics of the hydrophilic grained and anodized aluminium support. Examples of said compounds enhancing the ink-receptivity are disclosed in e.g. US-P 3,776,728, US-P 4,563,410 and EP-A-0 632 326. Preferably, said composition also comprises a surfactant.At the moment the treatment with the fixer is started the surface carrying the silver pattern may be in dry or wet state. In general, the treatment with the fixer does not take long, usually not longer than about 30 seconds and it may be carried out immediately after the processing and uncovering steps.The fixer can be applied in different ways such as by rubbing with a roller, by wiping with an absorbent means e.g. with a plug of cotton or sponge, or by dipping the material to be treated in the fixer. The image-hydrophobizing step of the printing plate may also proceed automatically by conducting the printing plate through a device having a narrow channel filled with the fixer and conveying the printing plate at the end of the channel between two squeezing rollers removing the excess of liquid.The following example illustrates the present invention without however, limiting it thereto. All parts, percentages and ratios are by weight unless otherwise indicated. EXAMPLE 1 ( Comparative example)An imaging element was obtained by coating a grained, anodized and sealed aluminium support with a silver-receptive stratum containing 0.7 mg/m2 PdS as physical development nuclei.An intermediate layer was then provided on the dry silver-receptive stratum from an aqueous composition in such a way that the resulting dried layer had a weight of 0.5 g of polymethyl methacrylate beads per m2, said composition comprising: a 20 % dispersion of polymethyl methacrylate beads in a mixture of equal volumes of water and ethanol having an average diameter of 1.0 um50 ml Helioechtpapierrot BL (trade mark for a dye sold by BAYER AG, D-5090 Leverkusen, West-Germany)2.5 g
saponine2.5 g sodium oleylmethyltauride1.25 g demineralized water300 ml(pH-value : 5.6) Finally a substantially unhardened photosensitive negative-working cadmium-free gelatin silver chlorobromoiodide emulsion layer (97.98 / 2 / 0.02 mol%) was coated on the intermediate layer, the silver halide being provided in an amount corresponding to 2.40 g of silver nitrate per m2 and the gelatin content of the emulsion layer being 0.58 g/m2 of ROUSSELOT T10985 (marketed by Rousselot S.A., France) and 1 g/m2 of KOEPF T7598 (marketed by Koepf A.G., Germany.)Subsequently the imaging element was conditioned for 7 days at 22°C and at a relative humidity of 35%, and cut in sheets which were conditioned for 7 days at 22°C and at a relative humidity as given in table 1. Immediately afterwards they were packaged by ten with on each sheet a paper spacer, conditioned together with the sheets of the imaging element, in a laminate of paper-20 g/m2/ aluminium-24.3 g/m2/ low density polyethylene-28 g/m1 which was then sealed. The paper spacer, manufactured by Intermills N.V., Belgium had a weight of 68 g/m2, contained less than 10 ppm by weight of formaldehyde and had a pH of 6.8The different air-tight packages were then stored for 2 days at 60°C and at a relative humidity of 35% and afterwards stored for 2 days at 22°C and at a relative humidity of 35%.After opening the sealed packages, one sheet from each package of the imaging element was exposed through a contact screen in a process-camera and immersed for 8 s at 24°C in a freshly made developing solution having the following ingredients: carboxymethylcellulose4 g sodium hydroxide22.5 g anhydrous sodium sulphite120 g hydroquinone20 g 1-phenyl-3-pyrazolidinone6 g potassium bromide0.75 g anhydrous sodium thiosulphate8 g ethylene diamine tetraacetic acid tetrasodium salt2 g demineralized water to make1000 mlpH (24°C) = 13 The initiated diffusion transfer was allowed to continue for 30 s to form a silver image in the image receiving layer.To remove the developed silver halide emulsion layer and the intermediate layer from the aluminium foil the developed monosheet DTR material was rinsed for 10 s with a water jet at 30°C.Next, the imaged surface of the aluminium foil was rubbed with a fixer to enhance the water-receptivity of the non-image areas and to make the image areas oleophilic ink-receptive. The fixer had the following composition : 10% aqueous n-hexadecyl trimethyl ammonium chloride25 ml 20% aqueous solution of polystyrene sulphonic acid100 ml potassium nitrate12.5 g citric acid20.0 g 1-phenyl-5-mercaptotetrazole2.0 g sodium hydroxide5.5 g water to make1000 mlpH (20°C) = 4 The printing plates thus prepared were mounted beside each other on the same offset printing machine (HEIDELBERG GTO-46) and were used for printing under identical conditions. Commercial AQUA TAME 7035E marketed by Anchor/Lithemko Inc., Florida, USA was used at a 5 % concentration in an aqueous solution containing 10 % isopropanol as dampening solution and K+E 171, marketed by Kast+Ehinger, A.G., Germany was used as ink. A compressible rubber blanket was used.The results with regard to the removal of the emulsion layer of the imaging elements after the rinsing and to the printing properties of the printing plates are given in Table 1.The removal of the emulsion layer, the ink acceptance and the printing quality were evaluated as follows :
a) Em. removal: this value relates to the remainder of parts of emulsion layer on the printing plate in the image areas (I.A) as well as in the non-image areas (N.I A) and is visually evaluated on a relative scale from 0 to 5, where 0 stands for a total absence of emulsion layer and where 5 indicates a substantially still complete coverage by emulsion layer. b) Ink acc.: number of copies that has to be printed before a constant ink acceptance in the printing areas is obtained: c) Pr. qual.: this value relates to the presence of white spots in the ink accepting areas of the 25th copy and is visually evaluated
on a relative scale from 0 to 5, where 0 stands for a total absence of white spots in the printing areas and where 5 indicates a very high number of white spots in the printing areas. Table 1Nod) R.H.e) ( % ) Em. removal.a) Ink acc.b) Pr. qual.c) -
I.A N.I.A I1500103-4 II200081-2 III300080-1 IV4000251 V5010501-2 VI6040&5005 d) No : the number of the package of the imaging element. e) R.H.: relative humidity. Evaluation: From the above it can be seen that printing plates obtained from the sheets of the imaging element, suitable for use in the present invention which have been stored in packages II - V in accordance with the invention show good printing properties e.g. an acceptable ink acceptance and a good printing quality. Printing plates obtained from the sheets of the imaging element, suitable for use in the present invention which have been stored in packages I or VI as comparaison show an unacceptable ink acceptance and a bad printing quality.
EXAMPLE 2 ( Comparative example)Printing plates were manufactured as described in example 1 with however the following modifications:
The laminate of paper-20 g/m2/ aluminium-24.3 g/m2/ low density polyethylene-28 g/m1 was replaced by a laminate of uniaxially oriented polyethylene films with the orientation perpendicular to
each other with a weight of 90 g/m2, a thickness of 100um and an optical density of more than 8. The paper spacer, manufactured by Intermills N.V., Belgium was replaced by a paper spacer of Illig'sche Papierfabrik Gmbh, Germany, having a weight of 58 g/m2, containing less than 10 ppm by weight of formaldehyde and having a pH of 6.8 The results with regard to the removal of the emulsion layer of the imaging elements after the rinsing and to the printing properties of the printing plates are given in Table 2.The removal of the emulsion layer, the ink acceptance and the printing quality were evaluated as indicated for table 1. Table 2Nod) R.H.e) ( % ) Em. removal.a) Ink acc.b) Pr. qual.c) -
I.A N.I.A I1500123-4 II200091-2 III3000100-1 IV4000130-1 V5000160-1 VI6020201-2 -d) No : the number of the package of the imaging element. -e) R.H.: relative humidity. Evaluation: From the above it can be seen that printing plates obtained from the sheets of the imaging element, suitable for use in the present invention which have been stored in packages II - V in accordance with the invention show good printing properties e.g. an acceptable ink acceptance and a good printing quality. Printing plates obtained from the sheets of the imaging element, suitable for use in the present invention which have been stored in packages I or VI as comparaison show a worse ink acceptance and a worse printing quality.
FreePatentsOnline.com. All rights reserved.